How to Make Your Own Dog Mask – The Fundamentals

In this article we’re going to look at how to create your own dog mask. We’ll cover the basics and then go on to look at a number of the more advanced tips and techniques which you can use.

For those who have a dog that likes to bark, and especially if your dog loves to play in the garden and other regions of the home, you need to get them some particular dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the first part of the set-up that will look a little scary at first, but it is really very simple. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not just cut a rectangular shape from the cardboard, so you will have http://www.tag-china.com/?p=38223 to cut around the edge of the mask so you get something that resembles a cone. The main thing here is to be realistic with what type of paper plate which you’re using.

Then you’ll need to wrap the cardboard around the edges of the paper plate, making sure there is a good seal between the two pieces so that you can make certain that nothing will leak when you put the mask on. Make sure that the edges are cut so the edges aren’t sharp, as this can damage the edges of the mask.

Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making certain it runs smoothly and evenly across the whole mask. You will want to start with one side of the mask , so you can work your way around it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it is best that you leave about one-fifth of an inch of paint on the edges so that it runs over the cardboard.

Don’t worry too much about the paint getting stuck into your mask. It’s easy to eliminate it later, and it will leave you with a nice finished mask to show off to everybody! It’s also a good idea to wash away any excess paint after you’re done, so that you don’t wind up with smudges or smears on your dog.

Then it is time to glue the mask onto your dog’s head. First you need to make sure that you get a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it is secure, then you can start to glue the mask on the dog’s face. Take the piece of cardboard that is used for the foundation of the mask and then fold it over. Be certain it’s quite strong and then use your hands to ensure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds till you’ve got the mask snugged securely onto the face of your dog. Do not make the folds too large or else it could look messy. As soon as you’ve done this, you can then take out the mask and attach the cardboard ears. And attach the other area of the mask on the dog. Be sure the ears are level and make certain it is not too short or long as this can cause some issues with the mask slipping off the dog’s face.

If you’re using a dog mask as your pet security, you’ll need to do some sanding to make certain it is safe on your dog. You can accomplish this by sanding off any excess paper which might have been eliminated from your mask.

Leave a Comment

Close Bitnami banner
Bitnami